Try it free

P0352: Fallo en el circuito primario/secundario de la bobina de encendido B

Reviewed short definition · generic SAE J2012 code · no full sheet yet

This page is available in Spanish only.

What it means

P0352 es un código genérico de la norma SAE J2012 (ISO 15031-6): significa lo mismo en cualquier marca. Su definición es «Fallo en el circuito primario/secundario de la bobina de encendido B».

La centralita lo guarda cuando detecta esa condición y, según el coche y el fallo, enciende el testigo de avería del motor. La causa concreta (un sensor, el cableado, una fuga, la pieza principal del sistema…) depende de la marca, del motor y de los síntomas: confírmala con un diagnóstico antes de cambiar piezas.

What this system monitors

Encendido y fallos de combustión (P03xx y P23xx). Este grupo reúne los fallos del sistema de encendido y los fallos de combustión: bobinas, bujías y sus circuitos, y los sensores con los que la centralita sabe en qué posición está el motor, como el del cigüeñal y el del árbol de levas.

All codes for this system

Can I keep driving?

It depends on the cause and on how the car is running.

The definition of the code is not enough to know how serious it is. If the check engine light flashes, you lose power, or you notice strong jerking, smoke, a burning smell, new noises or any change in the brakes or steering, stop as soon as it is safe and do not keep driving.

If the car is running normally and the light is steady, you can drive carefully to the workshop, without pushing the engine, and have it checked as soon as possible.

Interpret this code on my car Ask the AI Diagnose the fault

Guidance definition of a generic code, written with AI and reviewed. The actual cause depends on the make and the engine: confirm it with a diagnosis before replacing parts.

Nearby codes in encendido y fallos de combustión