What is limp mode?
A protection: the engine computer limits power when it detects a fault. It often clears after switching off and on, but the cause is still there.
Why a car loses power and how to narrow down the cause: turbo and hoses, air flow meter, EGR, particulate filter, fuel or ignition.
A car that "won't pull" can have many causes, from a turbo fault to something as simple as a dirty air filter. The key to narrowing it down is noticing when it happens: suddenly or gradually, cold or warm, at what engine speed, and whether any warning light comes on.
A sudden loss of power together with the engine light is usually limp mode: the engine computer limits power to protect the engine when it detects a fault, and it sometimes clears after switching off and restarting. The cause is still there, and only a reader plugged into the OBD socket shows what the computer saw.
There are also situations where the car feels weak without being faulty: too high a gear on a hill, a heavy load, the air conditioning running or driving at altitude. Rule them out before thinking of a fault.
| When it happens | Common causes | Clue |
|---|---|---|
| Suddenly, with the engine light | Limp mode because of turbo over- or under-boost, sensors, EGR | Read the OBD code; it often comes back after switching off and on |
| Under hard acceleration, on turbo engines | A loose or split boost hose, vacuum lines, a sticking turbo geometry | Sometimes you hear a whistle or a hiss |
| Gradually, with higher consumption | Clogged air filter, dirty air flow meter, injectors, spark plugs | Check any overdue servicing |
| Diesel with black smoke or the filter light | Saturated particulate filter, dirty EGR | Urban use with short trips |
| Revs rise but it does not go faster | Slipping clutch | Most noticeable in high gears and uphill |
Reviewed in October 2026. General information: the actual cause depends on your car and is confirmed with a diagnosis. How we make our content
Organised and ready to use: what is most likely, what to check and what it may cost.
Illustrative example: yours will depend on your car and what is wrong with it.
Loss of power when accelerating, sometimes with a whistle. Check the intake hoses first.
You can share it with your garage or print the sheet
A protection: the engine computer limits power when it detects a fault. It often clears after switching off and on, but the cause is still there.
At what revs it happens, whether cold or warm, whether there is smoke and what colour, and the OBD codes if you have them.
Yes. The Free plan includes 3 tool uses a month, no card needed, so you can try them. Paid plans raise the limits.
Yes. Every result is kept in your history and you can share it with a read-only link, for example to show it to your workshop.
AI-generated guidance. It may contain errors: confirm any important information and see a professional for anything that affects safety.